Beli alat tukang set di monotaro.id

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. 4 Piece Sizes: No. 2, 3, 4 and 5. 6 Piece Sizes: No. 1, 2, 3, 4, 5 and 6.

Tekiro Tap Balik Set 6 pcs adalah salah satu jenis Obeng yang termasuk kedalam kategori Screwdriver atau biasa disebut juga dengan istilah obeng minus, obeng plus, obeng set atau obeng kembangSuatu alat memiliki ulir yang bisa membuat tep / lubang derat halus maupun kasar, Dengan ukuran sesuai kebutuhan.Fungsi : Untuk membuat suatu lubang derat halus ataupun kasarMaterial : Chrome VanadiumDimensi : 1/8mm 1/4mm 1/4mmkonten produk 6pcs : Tap Balik1/8 inch-1/4 inch(M3-M6)1/4 inch-5/16 inch(M6-M8)5/16 inch-7/16 inch(M8-M11)7/16 inch-9/16 inch(M11-M14)9/16 inch-3/4 inch(M14-M18)3/4 inch-1 inch(M18-M25)

Screw Extractor:No.1= 1/8inch~1/4inch (3~6mm)No.2= 1/4inch~5/16inch (6~8mm)No.3= 5/16inch~7/16inch (8~11mm)No.4= 7/16inch~9/16inch (11~14mm)No.5= 9/16inch~3/4inch (14~19mm)No.6= 3/4inch~1inch (19~25mm)

Produk ini juga sering disebut dengan Tap Balik

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component.

It cannot be used for hardened bolt and stainless bolt.

Not for hardened bolt nor stainless bolt.

Drive into end of broken pipe or fitting.Use tap holder or wrench on extractor to turn out broken part.Size stamped on extractor refers to drill bitsize to be used with that extractor. Set Content : Screw : 1/8inch, 3/16inch, 15/64inch, 5/16inch, 3/8inch, 15/32inch, 9/16inch, 21/32inch, 13/16inch, 1-1/16inch

Usage:To pull out broken bolts and pipes.

Produk Mesin Potong Kayu Meja dari Makita ini memiliki kecepatan 3.4-3.8RPM, cocok untuk industri manufaktur, tukang kayu dan juga pemakaian sehari-hari

Usage:To pull out broken bolts and pipes.

High quality materialUsed to open a broken bolt on the body material

Usage:To pull out broken bolts and pipes.